This page gives you an idea of the work involved to produce a SWS static vivier system
Click
here to contact us by clicking this button
Exterior
Layout and design phase is expected to take approximately
2 weeks.
Templating, electrical/pipework routing and first fix approximately
2 weeks.
Final
fit, testing, implementation and acceptance trial will be the
final phase of the project and should take approximately 7-10
days.
Click here to contact us by clicking this button
Click here to contact us by clicking this button
Stainless tanks fixed to raised platform to allow easy access to trunking and feed pipes.
Air is provided from overhead pressure monitored feed pipes.
Access to tanks, switch gear, pumps and alarms via raised walkway.
General Interior
Interior tank layout and blowers
Filtered air intakes and constant flow blowers ensure adequate air flow for all tanks.
Uniform matrix layout ensure even air distributuion and water circulation in the tanks during operation.
Overhead sprayers (Not Shown) ensure good oxygen absorption at the surface and facilitate good gas exchange.
Interiors (Tank matrix in place)
Tanks inter-connected to prevent overflow.
Standardised layout
Standardised layout allows easy access to pumps and switch gear for future maintenance.
Click here to contact us by clicking this button
Robust Internal connections and switch gear.
Internal Monitoring and Alarms
System Monitoring and Alarm Systems
All essential system power and environmental factors are automatically monitored and alarmed.
Click here to contact us by clicking this button
RobustTaps and Pipes.
Pipes and taps are deisgned to be easy to clean and be easily accessible.
Click here to contact us by clicking this button
Drains and pipeline feeds in place.
Final stages of completing
the wiring,
control systems and blowers installation on
the
external cradle.
Drains and Overflow.
Click here to contact us by clicking this button
Drains and pipeline overflow feeds in place. These ensure that the tanks can be safely drained and the water levels easily maintained.
Drains and Overflow.
Click here to contact us by clicking this button
Drains and pipeline feeds in place. These ensure that the tanks can be safely drained and the water levels easily maintained.
Note the rodding piont for easy access in case of blockages.
Spray System in Place.
Click here to contact us by clicking this button
Overhead spray system ensures good surface gas exchange and helps maintain water levels.
Input and Outflow.
Click here to contact us by clicking this button
Clip on inlet and outlets helps in quick fill and drainage and the maintance of steady flow states within the tanks.